EGR Blanking plate suits Nissan ZD 30
Manufactured from quality stainless steel

EGR valve is #1 root cause for ZD30 Engine Failure.
Exhaust Gas Reticulation valve recycles inert (but very dirty) exhaust gas back into the inlet manifold in an effort to reduce emissions.
However, the blank gunk deposited creates restrictions in the inlet manifold causing hot spots and starvation to mainly number 2 and 3 cylinders.
Exhaust Gas Reticulation Valve (EGR) failure is the #1 root cause for Nissan ZD30 Engine failure.

Navara D22 ZD30 Direct Injection 2001-2008 70mm EGR001
This does not fit to the EGR itself, it goes on the cast EGR pipe toward the top of the motor on the right-hand side of the engine (inlet manifold).
If fitting this plate without the Dawes valve (boost controller) fitted the vehicle may experience limp mode due to the EGR block slightly increasing boost pressures.

Patrol GU ZD30 Direct Injection 2000-on 70mm EGR001
This does not fit to the EGR itself, it goes on the cast EGR pipe toward the top of the motor on the right-hand side of the engine (inlet manifold).
If fitting this plate without the Dawes valve (boost controller) fitted the vehicle may experience limp mode due to the EGR block slightly increasing boost pressures.

!!! Please Note !!! 
Free Delivery is letter post And has No Tracking and can take a minimum 6 and up to 10 Business days.
If You Don't Wish To Wait This Long Please select One Of Other Post Options Given At Checkout.
Parcel post $8.95 Is Trackable and will be 1-5 business days depending on the state.
Express Post $11.95 Trackable and the fastest mode.

Things to know before undertaking this Mod

1.  It is not a legal modification to change the way the vehicle’s emission control system functions. This modification is recommended for off-road and race vehicles. There is however no roadside diesel emissions testing of vehicles in Australia. All Diesel emission tests are carried out at the time of original engine certification.
2. In some cases fitting an EGR blanking plate will cause a fault code to appear or the “check engine light” to come on. This is because the ECU will read an incorrect flow on the EGR system. For these type of vehicles, we have an EGR blanking plate with a 10mm hole in the centre to allow enough EGR flow to satisfy the ECU whilst restricting the majority of exhaust gas to the intake. Unfortunately, this is not an exact science and we have seen the very rare example of code being thrown on a vehicle that hundreds of the same vehicle had previously not had any issues with. In these cases, we are reluctant to offer for sale a plate with a 10mm hole and instead suggest that you remove the plate and drill your own 10mm hole which should fix your individual issue.

In all cases, we leave it up to the individual customer to decide if they wish to do this modification.

Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.