TOYOTA COIL STRUT SPACERS - PAIR

Suits

200 SERIES WAGON 11/07-on

25MM Thick spacers = Approx 37mm Lift

Kits Contain - Pair of Coil Strut Spacers - Plus all Fitting Hardware (studs, nuts etc.)

These are a cheap and effective way of leveling out your vehicle, or getting that bit of extra height, , With most IFS vehicles hitting the market with their nose down already!

Preparation of coil strut spacer...

• Fitment of Coil Strut Spacer to vehicle
• Remove the strut from the vehicle
• Place the coil strut spacer on the top plate of the strut with studs facing up.
• Using nuts supplied, attach to strut top plate.
• Replace the strut back into the vehicle locating the top 3 studs first, with factory nuts.
• When aligning the lower strut mount you may need to compress the spring to allow for relocation.

IMPORTANT: It is recommended to arrange a front end wheel alignment after installation.
Failure to do so can result in alignment issues and uneven tyre wear.

We do not recommend thatthese spacers be used on a vehicle that already has a spring lift.

It is recommended that the Coil Strut Spacers are installed by a qualified and licensed mechanic. These instructions are only included as a rough guide to installation. All Bolts and Hardware removed should be double checked to ensure re-fitment to relevant factory specifications.

With any lift on your IFS vehicle, the higher you go the more angle on your CV's, This increased angle means your CVs are not running at the factory desired angle, causing premature wear on your CV's and CV Boots (worn CV boots are RWC Issue), and increasing the chances of a breakage, Have a look in our store for the Hilux Diff Drop Bracket to alleviate these issues

Check with your local Roads Authority to determine if the installation of Coil Strut Spacers are legal in your State.