DC182P EXTRA HEAVY DUTY ALBRIGHT 12V WINCH SOLENOID 

With 50% More power Handling than other albright models, 

DC182P Series Extra heavy duty solenoid is specially designed for high current draw competition winches

Albright DC contactors and winch solenoids With over 70 years experience in manufacturing the Albright DC182P series of winch solenoids are the best on the market.
Their superior duty cycle and water proofing makes them ideal for use in offroad conditions.
Capable of withstanding high current loads these solenoids are suitable replacement solenoid for any Hi Output winch motor

These units are water and shock proof. Can be used with 12v or 24v applications but requires 12v Current for switching only

In a small, water resistant package, the Albright solenoid can be located near the winch, or in the engine bay for ultimate reliability. One Albright contactor is needed to replace the solenoid pack on standard winches.
This series features Extra larger contacts than the standard DC88 item, improving reliability and reducing the risk of premature contactor and motor failure.

T

The features of the Albright HiOutput Solenoid are:

• Lower casing made from less rigid material making the unit more resistant to knocks and bangs
• IP67 Rating, Protected for dust ingress and Water
• Built in mounting brackets for secure fitment
• Extra Heavier duty internal contacts
• Heavy Duty m8 terminal posts
• Spade Terminals for switching circuitry spaced further apart for ease of fitting/maintenance
• 1 yr component failure warranty 
• Compatible with wireles remotes
• Ideal for series wound and permanent magnet DC motors
• Bi-directional for winches with release and retrieve motors (F1 & F2)
• Max Current  Amps
• 12v Switching
• Voltage 12 Volt & 24 Volt DC versions
• Winch Loads 4,500lb to 18,000lb
• Warranty 12 Months
• Size Spec: 1660gm, 120mm H x 125mm W 74mm D

PLEASE NOTE: THIS SOLENOID WILL WORK WITH ANY SERIES WOUND MOTOR ( Three terminals on top and earth post underneath) - IT IS NOT SUITABLE FOR A PERMANANT MAGNET MOTOR (two terminals)
Solenoid Specification Value