Idler arm to suit Toyota Hilux 4 Runner 8/91 on

If you have noticed your steering becoming vague over time, as in you can move the steering wheel a few inches either way and nothing happens, or if you suffer from bump steer, hit a bump or pothole and the car jumps and changes direction, or general vibration that is not caused by obvious things like tyre balance, Then you most likely have worn tie rod ends or Idler arm.

Well this will fix it for you, a brand new high quality Idler arm; in most cases whilst you have it apart it is advisable to do both arms, if you wish to do this select 2 in the checkout area.

To suit specific vehicle models...

SX9375
Idler Arm
3 Bolt Mount with 205mm c/c on arm
Toyota 4Runner 8/91-1995 RN130,RN135,YN130,YN135,LN130,LN135,VZN130 4WD
Toyota Hilux 8/91-on RN101/106/110/126/130 4WD
Toyota Hilux 8/91-on LN107/111/130/135 4WD
Toyota Hilux 8/91-on YN130/135,VZN100/105/110/130/131 4WD

When fitting this Idler Arm care must be taken to ensure that the stops that come into contact with the arm must touch at EXACTLY the same time as the steering stops, at the back of the front wheel, make contact. “Stop” adjustment should be periodically checked, especially if new wheels or tyres are fitted.

Please note this product is an aftermarket product that is designed to fit the above mentioned vehicle(s), any mention of vehicle brand or model is only to allow you to establish the correct fitment for your vehicle, and is not indicating that the part is manufactured by the original vehicle manufacturer.